NanoPi M3 S5P6818 Octa-Core Cortex-A53 Development Board+Cooling Set+3D Printed Housing+8GB TF Card+USB Cable=Nano Pi M3 KIT-E-B

-Product Description-

NanoPi M3 S5P6818 Octa-Core Cortex-A53 400MHz~1.4GHz+Cooling Set+3D Printed Housing+8GB TF Card+USB Cable=Nano Pi M3 KIT-E-B

-Overview-

The NanoPi M3 is another ARM board developed by FriendlyARM for makers, hobbyists and hackers. With this new friend we wish you could get not only tech skills but also unique experiences in various applications and hacking. It is small, elegant but has rich ports and interfaces. Playing with it and working with it the M3 will not only inspire your ideas but also turn them into realities. The NanoPi M3 uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC. Its dynamic frequency scales from 400M up to 1.4GHz. It has Gbps Ethernet port, built-in WiFi and Bluetooth. Its AXP228 PMU supports software power-off, sleep and wakeup functions. In addition the NanoPi M3 has MicroUSB port for power supply and on-board porcelain antenna. On this tiny board various ports and interfaces are integrated. It has DVP Camera/LVDS/HDMI/LCD interfaces, Gbps Ethernet, I2S, 3.5mm audio jack, four USB ports and a serial debug port.

NanoPi M3 Features SoC:Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz – 1.4G Hz Power Management Unit:AXP228 PMU, it supports software power-off and wake-up. System Memory:1GB 32bit DDR3 RAM Storage:1 x MicroSD Card Socket Ethernet:Gbit Ethernet(RTL8211E) WiFi:802.11b/g/n Bluetooth:4.0 dual mode Antenna:Porcelain Antenna IPX Interface Audio:3.5 mm audio jack / via HDMI I2S:7pin, 2.54mm pitch pin-header USB Host:4 x USB 2.0 Host, two type A ports and two 2.54 mm pitch pin-headers MicroUSB:1 x MicroUSB 2.0 Client, Type A LCD Interface:0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8 HDMI:1.4A Type A, 1080P LVDS:20pin 2.00mm pitch pin-header DVP Camera:0.5mm pitch 24 pin FPC seat GPIO:2.54 mm pitch 40 pin-header Serial Debug Port:2.54mm pitch 4pin-header User Key:K1 (power), Reset LED:1 x power LED and 1 x status LED RTC Battery:RTC Battery Header Power:DC 5V/2A PCB:Six Layer, ENIG Dimension:64 mm x 60 mm OS/Software:u-boot, Android and Debian -Other Main Module-

• The Cooling Set

• The Printed Housing

-Example-

-Download Resources-

• WIKI:

http: //wiki.friendlyarm.com/wiki/index.php/NanoPi_M3

• github:

https: //github.com/friendlyarm

-Package List-

1. NanoPi M3 x1

2. 3D Printed Housing x1

3. Cooling Set for M3(Heat Sink and Cooling Fan) x1

4. 8GB TF Card x1

5. USB Cable x1

-Similar Products-

We do not responssible for any customs tax or any other extra fee happend on your country’s customs.

USD 41.66/pieceUSD 91.66/pieceUSD 58.66/pieceUSD 24.66/pieceUSD 45.66/pieceUSD 93.66/pieceUSD 4.66/pieceUSD 46.66/piece