5 sheets* 285mm x 208mm High temperature masking Sealing Tape for 3D Printer powder coating koptan tape
 |
45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller. |
|---|---|
 |
On-time Delivery Guarantees: On-time Delivery 60 days |
5 sheets* 285mm x 208mm High temperature masking Sealing Tape for 3D Printer powder coating koptan tape
Application Guide
1. Wear latex, nitrile, or similar gloves during application to protect your skin from chemicals and to prevent fingerprints and grease from sticking between the tape and the build plate. 2. A squeegee or flat, semi-flexible card, like a credit card, is essential for applying Polyimide tape well. If you are using a card, ensure the edges are not too sharp, or it may cut into the Polyimide tape. 3. Remove any current Polyimide tape film or other film coating from your printer’s build plate, and then clean the plate thoroughly to remove any adhesive residue and fingerprints. 4. Partially peel the plastic backing away from a new sheet of Polyimide tape film. 5. Line up the exposed adhesive edge of the Polyimide tape film with one of the shorter edges of the build plate, leaving some overlap up to the thickness of the build plate to later fold over the edges of the build plate 6. Using light pressure with a squeegee, press the first inch of the Polyimide tape film to the build plate 7. If there are any troubles with alignment or wrinkles, gently pull up the Polyimide tape film and reapply. 8. Once the first inch is applied correctly, use firm pressure with the squeegee to fully adhere that section to the plate 9. If there is too much excess, it can be trimmed at this point, still leaving some excess to fold over the edges, depending on the thickness of your build plate. Fold the remaining excess over the edges of the build plate sides, and use the squeegee to firmly adhere. Feature:
1. Frequency conversion power supply in electronic industry. also use as a perfect heat resistance tape on 3d printing, powder coating, etcs
2. Protection of Printed Circuit Boards during wave soldering 3. Insulation on Transformers, Motors and Coils, Fiber Optics Cables, Solar Panels. 4. High temperature masking 5. Excellent electrical insulation 6. Outstanding dimensional stability 7. Great thermal resistance 8. Leaves no defective gum when tear off 9. Discs are on a clear, slit back liner for easy removal
Specifications
Materials: polyimide tape
Color: Amber
Adhesion Type: Silicone
Total Thickness: 0.06mm
Adhesion to Steel: >6N/25mm
Tensile Strength: 115N/25mm
Elongation: >50 %
Dielectric Strength: 5,000 volts
Insulation Resistance: excellent
Temperature Resistance: 280°C
Resistance to acids, oils, solvents: Excellent
Length: 285mm
Width: 208mm
Package Contents of polyimide tape
- 100% Brand NEW
- 5 sheets x 285mm*208mm x 0.06mm polyimide tape
Picture of polyimide tape
0 out of 5 (0 Ratings)
| Positive (0 %) |
5 Stars(0)
|
|
4 Stars (0)
|
|
| Neutral (0%) |
3 Stars(0)
|
| Neutral (0%) |
2 Stars(0)
|
|
1 Star(0)
|
| Name | Rating | Feedback |
|---|
| Shipping Company | Shipping Cost | Estimated Delivery Time |
|---|---|---|
 |
3 - 7 days | |
 |
3 - 7 days | |
 |
5 - 14 days | |
| Post Air Mail | Free Shipping | 15 - 45 days |
| Return Policy | If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
|---|---|
| Seller Service | On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
High Precision XP timing belt slide module Sliding Table effective stroke 100mm+1pc nema 23 Stage Linear Motion Moulde Linear
pneumatic element BC series regulator BC3000Series Air Filter Regulator G3/8
High quality Flow Control Valve port 1/8″ RE-01 air Valve
Right Pneumatic High Quality BL2000 air source treatment 1/4”
DNC-80-125-PPV-A Pneumatic Cylinder DNC series Standard Cylinder Double Acting FESTO Type
7V Floating Water Pump Solar Panel Garden Plants Watering Power Fountain Pool
US $14.04 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.
▼
