3/4 inch Venturi injector, Ozone mixer, Ozone Generator parts

Longlife Venturi Injectors are high efficiency,differential pressure injectors. Longlife Venturi Injectors are of

very high quality and are technically designed for exact performance.

Technical parameter:

Ozone venturi injector to mix ozone to water,a good parts for ozone generator;
PVDF material with good ozone resistant.

Input pressure: 2-5 Bar ;

Air suction capacity: 7.5-10 Nm3/h

water inlet/outlet: 3/4 inch

Air inlet:1/4 inch

Length:153mm

Water flow: 1-3 ton per hour

Suported Water Pump Power: 0.55 kw

Working Water Depth: 0.0-2.5 m

Special Features:

. Very high ozone mass transfer rate (up to 90%)

· Considerable cost savings versus other injection methods.

· Single unit construction-Trouble free operation with no moving parts

· No electrical connections needed

· Can run dry with no problems

Venturi Injectors (Injectors) work by forcing water through a conical body which initiates a pressure

differential between the inlet and outlet ports. This creates a vacuum inside the injector body,which initiates

ozone suction through the suction port.