Free Shipping 40mm flat wide mouth tubular nozzle for Plastic Welding Gun/hot air heat gun/for plastic Welder Mouth Lst1600
45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller. | |
On-time Delivery Guarantees: On-time Delivery 60 days |
40mm flat wide mouth tubular nozzle for Plastic Welding Gun/hot air heat gun/for plastic Welder Mouth Lst1600
Material:304 stainless steel
Weight:0.075 kg
size:40 mm
Instruction specifications:
Hot-Air Welding is used for polypropylene, polythene, PVC and polycarbonate.
The welding rod must be of the same material.
Ensure that the speed welding nozzle is clean with sharpcutting edges.
The parts to be welded must be supported in place and blocked to ensure air cannot escape through the seam.
The welding nozzle should be held so that the air slot is parallel with the seam to be welded. At the end of the weld,
the rod is cut with the cutting edge by means of a twist of the wrist. The shoe at the end of the nozzle should force
the softened welding rod into place. (fig 9)
To weld slowly, set the heat to a lower setting.
To finish off an awkward or unsightly weld, the excess material can be cut away with a stanley knife, ground away with
a file or tooled using the gun and a cold screwdriver or chisel.
Speed Welding
The use of speed welding tips on our hot air tools increases the both the concentration of hot air and the amount of
profile welding material that can be deposited in one pass. Generally, welding with this method results in welding speeds
up to 15 times faster than pendulum welding. The welding process itself, as shown below, is the same as the pendulum
method with the exception that the speed welding nozzle is used to guide the rod onto the welding joint.
Plastics Recognition
Take a small sliver or shaving of the material to be welded and light it with a flame, observe and smell the smoke.
· For PVC: blackish smoke and acrid smell.
· For Polyethylene (PE): no smoke, the melted material drips like candle wax and smells of wax.
· For Polypropylene (PP): no smoke, the melted material drips like candle wax and smells of burnt oil.
· For Polyamide (PA): no smoke, melted material pulls to form a thread and smells of burnt horn.
· For Polycarbonate (PC): yellowish sooty smoke, sweet smell.
· For ABS: blackish smoke, sooty flakes, sweet smell.
Welding Rod types & Suggested Welding Temperatures
0 out of 5 (0 Ratings)
Positive (0 %) |
5 Stars(0)
|
4 Stars (0)
|
|
Neutral (0%) |
3 Stars(0)
|
Neutral (0%) |
2 Stars(0)
|
1 Star(0)
|
Name | Rating | Feedback |
---|
Shipping Company | Shipping Cost | Estimated Delivery Time |
---|---|---|
3 - 7 days | ||
3 - 7 days | ||
5 - 14 days | ||
Post Air Mail | Free Shipping | 15 - 45 days |
Return Policy | If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
---|---|
Seller Service | On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
1pc HRC45 Ball Nose R5 x 10 x100 Solid Coat Carbide Radius End Mill CNC Milling
New 1pcs EMR 5R50-22 Face End Mill Cutter Indexable Cutter For Flat Cutting
New ER16 MT1 M6 Collet Chuck Holder Fixed CNC Millling lathe Morse taper #1
16mm Round Shank CNC Milling Internal Threading Tool Holder S20R-STUCR16
DC-RDWPS02 2 inch (50mm) polishing sheet pads for diamond drum wheels for polishing granite and marble
New wholesale 1pcs SSKC20-20-130L Chamfer indexable end mill cutter CNC mills
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.