1D wireless barcode scanner with memory/charging fuction handheld laser bar code reader easy to use no driver plug and play

Frequency 2.4G Communication distance 400m Light source Visible lasing diode; Wave length: 650nm Scanning mode Bi-directional single line scanning Scanning speed 200 scans / sec Scanning accuracy 0.10mm PCS0.9 Scanning width 30mm @ The scanner window, 220mm @ 200mm Scanning depth of field 0~550mm (0.33mm, PCS 90%) Tilt & Elevation & Deflection 30° & 75° & 65° Interfaces supported USB Print contrast ratio At least 30% reflectivity difference Error rate 1/5,000,000 Promoting methods Buzzer, LED indicator Scanning ways Trigger manually or continuous scanning Decoding abilities EAN-8, EAN-13, UPC-A, UPC-E, Code 39, Code 93, Code 128, EAN128, Codaber, Industoal 2 of 5, Interleave 2 of 5, Matrix 2 of 5, MSI, China postal code, etc. Power source DC5V Working current 85mA Quiescent current36mA Laser safety National safety standard Class 2 Electromagnetic compatibility CE, FCC, DocCompliance Operating temperature 0 ~ 45 degree Celsius Storage temperature -20 ~ 60 degree Celsius Humidity Relative humidity 5% ~ 90% (No condensation) Ambient brightness Max. 5,000 lux (fluorescence) Anti-knock Can withstand 1.8m free fall Material ABS + PC + Rubber Cable length Approx.150cm Package List: 1 * Wireless laser barcode scanner 1 * USB charging cable 1 * Wireless receiver 1 * User manual Use Introduction The first step: the wireless USB cable plugged into the computer used by the receiver’s USB port, no driver. Step Two: Place the cursor on the information you want to place the input scan or open a document, scan the bar code scanning gun, when the barcode displayed on the computer above is a success.

NOTE: This device is shipped, we had set up, and can be used directly, please do not go sweep arbitrary code on the manual test, if you are not careful sweep the instructions on the bar code, you can read it again Initial Set The bar code on the restoration of the factory set up.