FriendlyARM ARM Development Board S3C6410 ARM11,MINI6410+4.3 inch touch LCD,256M RAM+1G Nand Flash,Android

ARM11 Board S3C6410 MINI6410 + 4.3” TFT Touch Screen

256M RAM +1G SLC NAND FLASH

—————————————————————————————————————————————

The MINI6410-1405 development board is an excellent ARM11 board offering a comprehensive solution integrating both hardware and software. It is designed, developed and distributed by Friendly ARM. It applies the Samsung S3C6410 microprocessor and inherits all the features and benefits of our most popular MINI2440 products excelling in quality and easy to use with low cost. Compared to our previous products it has more reliable design and varied interfaces. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.

In addition we make the best use of the SD booting feature, by using our specially developed Superboot, enabling the board bootable from an SD card. With Superboot users can copy various systems (WindowsCE6/Linux/Android/uCos2) into an SD card (up to a maximum memory of 32G) and install them on the board without connecting to a PC, or run them on the SD card without burning systems onto the board.

-Main Features-

• ARM11 Samsung S3C6410, ARM1176JZF-S, up to 533MHz
• 256MB DDR RAM and 1G NAND Flash
• LCD/Touch Screen, CVBS/TV, Audio support
• SD card, USB Host/OTG support
• Ethernet, serial port, GPIO
• GPRS/WIFI/GPS/Camera/3G module/USB Bluetooth support (option)
• Linux 2.6.28, WinCE6.0, Ubuntu support
• Support Android 2.3
• Source code provide

-Specification-

• Dimension: 110 x 110 mm
• CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
• RAM: 256 MB DDR RAM, 32 bit Bus
• Flash: 1G NAND Flash
• EEPROM: 256 Byte (I2C)
• Ext. Memory: SD-Card socket
• Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
• IR: Infrared Receiver
• USB: 1x USB-A Host 1.1, 1x miniUSB Slave/OTG 2.0
• Audio Output: 3.5 mm stereo jack
• Audio Input: Condenser microphone
• Ethernet: RJ-45 10/100M (DM9000)
• RTC: Real Time Clock with battery
• Beeper: PWM buzzer
• Camera: 20 pin (2.0 mm) Camera interface
• TV Output
• LCD Interface: 40 pin (2.0 mm) and 41 pin (1.0 mm) connector for FriendlyARM Displays
• Touch Panel: 4 wire resistive
• User Inputs: 8x push buttons and 1x A/D pot
• User Outputs: 4x LEDs
• Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm)
• Debug: 10 pin JTAG (2.0 mm)
• Power: regulated 5V
• Power Consumption: Mini6410: 0.25 A, Mini6410 + 4.3″ LCD: 0.5 A
• OS Support

• Windows CE 6
• Linux 2.6
• Android
• Ubuntu

-Hardware-

-LCD-

4.3 inch touch screen

Display resolution: 480*272

-Manual list-

-Package list-

• Mini6410 board ( Preload with Linux/WINCE6) x 1
• TFT LCD: 4.3″ , with touch panel x 1
• DB9 Serial Converter x 1
• USB cable x 1
• Net cable x 1
• 5V power adapter x 1
• DVD-ROM with product reference x 1
• Touch Pen for touch panel x 1

– Attention-

USD 134.66/pieceUSD 196.66/pieceUSD 195.66/pieceUSD 160.66/pieceUSD 144.66/piece