MakerBot Heat Tape10sheets * 246.44 mm * 209 mm Easily Applies to Build Platform Adhesive Blue Painters Tape For 3D Printer
45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller. | |
On-time Delivery Guarantees: On-time Delivery 60 days |
MakerBot Heat Tape10sheets * 246.44 mm * 209 mm Easily Applies to Build Platform Adhesive Blue Painters Tape For 3D Printer
Description
3D printer blue painter tape is based on blue crepe paper and coated with acrylic adhesive. It is widely used in masking the place remanding protection during painting, spraying, 3D printing etc.
Feature
Tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.
It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal. This Rectangle Piece of Painters Tape will cover the 3D Printer Print Bed with one single piece. Perfect 1 piece application! Nearly all filament types (ie PLA) will stick to this tape, but come off with relative ease after printing is completed.
Item
Brand: Yihang
Size: 246.44 mm * 209 mm
Pack: 10 sheets/pack
Application
3D printer blue painter tape has been widely used for masking during indoor decoration and 14 days outdoor painting, packing light objects, fixing pictures, sticking pads, 3D printer etc.
Widespread use in shoes,indoor decoration,electric machine,car,the furniture made of iron or plastic,capacitor and electrics,precise electroplate.
Fit for connection organic silicon material.
Instructions:
Step 1. Clean the Printing Bed Off with some Rubbing Alcohol.
Step 2. Remove the Tape Sheet from its Backing and apply to the Surface of the Printing Bed.
Step 3. Clean the Taped surface off with some Rubbing Alcohol.
Step 4. Make Sure that if you haven’t leveled the print bed with the tape on it, that you go through the leveling procedure to adjust for the extra thickness of the tape.
Step 5. After Printing make sure to carefully remove the printed piece from the tape with a thin spatula.
Step 6. After Each Print clean the Tape Off with some Rubbing Alcohol. Each Sheet of Tape should last for many prints, depending on the type/size of prints you do. To make it last longer, try printing on different sections of the tape bed to get the most from it.
Photo
0 out of 5 (0 Ratings)
Positive (0 %) |
5 Stars(0)
|
4 Stars (0)
|
|
Neutral (0%) |
3 Stars(0)
|
Neutral (0%) |
2 Stars(0)
|
1 Star(0)
|
Name | Rating | Feedback |
---|
Shipping Company | Shipping Cost | Estimated Delivery Time |
---|---|---|
3 - 7 days | ||
3 - 7 days | ||
5 - 14 days | ||
Post Air Mail | Free Shipping | 15 - 45 days |
Return Policy | If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
---|---|
Seller Service | On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
DC3-6V motorized ball valve 2 way BSP 1/2” brass valve 2/3/5 wires
Mini air cylinder MA32-45 stainless steel bore 32mm stroke 45mm double acting small pneumatic cylinder
Plastic silencer muffler PSU-15 thread 1/2″ PSU type plastic timing muffler air connector pneumatic
free shipping Stainless steel glass door hinge bathroom clip shower room hinge glass clamp household hardware 90-degree hinge
1roll * 20mm * 33M High temperature Polyester PET Green Tape for Powder Coating
3V210-06 AC220V two tee pneumatic solenoid valve port 1/8″
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.